Menu

Specifications

Coloured Roof Lantern
Timber Roof Lantern White Roof Lantern

Standard measurements for roof lantern

Roof Pitch - 30 degrees
Sidelight height (where applicable) - 400 mm
Rafter width - 40mm

Timber

Utile / brazilian cedar or equivalent hardwood timber classified as durable / very durable.

Paint

We use advanced microporous paints and stains, which we have used very successfully over a number of years. The finish is satin white as standard. Coloured finishes are available on request (at small extra cost).

Opening Sash and Skylight Furniture

Where applicable, good quality brass or chrome fitting can be provided. Provision can be made for electric remote control opening.

Glass

Standard specification – Double glazed, air-filled units (4/16/4) with toughened inner and outer leaves conforming to current British Standards. As standard we use a K glass inner leaf which gives a U value 1.6. A whole range of specialist glass is available (softcoat which has U value of 1.4, antisun, argon filled etc).

Listed buildings and those in conservation areas may be exempt from building regulations for their glass specifications.

Safety

Pilkington T glass used achieves class A impact safety performance to BS6206:1981. Note: in the future references to BS6206 in BS6262-4 and relevant building regulations (e.g. part N in England and Wales) are likely to be superceded by BS EN 12600.

Glazing Cappings

As standard we supply white powder coated aluminium cappings with E.P.D.M seals which provide a maintenance free finish. If required, painted timber cappings (with E.P.D.M seals) can be supplied at no extra cost.

Opening Skylights (applicable to roof lanterns without glazed sidelights). Powder coated aluminium.

Note: Coloured paint finishes can also be provided at additional cost. We do have our own colour range but if a specific colour is required we can match your RAL colour or equivalent.